>>> Emerging : portage://dev-embedded/openocd-0.12.0-r2:run?{[]}

These are the packages that would be merged, in order:

Calculating dependencies... done!

 └─step  1─┤ unmask  portage://dev-embedded/openocd-0.12.0-r2

 └─step  2─┤ download  portage://dev-embedded/libftdi-1.5-r8
             │           └─ file ─┤ 113.57 Kb  	 libftdi1-1.5.tar.bz2
             │ download  portage://dev-embedded/libjaylink-0.3.1
             │           └─ file ─┤ 59.63 Kb  	 libjaylink-0.3.1.tar.bz2
             │ download  portage://dev-embedded/openocd-0.12.0-r2
             │           └─ file ─┤ 8.05 Mb  	 openocd-0.12.0.tar.gz
             │ download  portage://dev-lang/jimtcl-0.82
             │           └─ file ─┤ 4.23 Mb  	 jimtcl-0.82.tar.gz
             │ download  portage://dev-libs/hidapi-0.15.0
             │           └─ file ─┤ 355.31 Kb  	 hidapi-0.15.0.tgz
             │ download  portage://dev-libs/libusb-1.0.30
             │           └─ file ─┤ 640.73 Kb  	 libusb-1.0.30.tar.bz2

 └─step  3─┤ install   portage://acct-group/plugdev-0-r3
             │ install   portage://dev-lang/jimtcl-0.82
             │           └─ conf ─┤ USE = "-doc -static-libs"
             │                    │ SLOT = "0/0.82"
             │ install   portage://dev-libs/libusb-1.0.30
             │           └─ conf ─┤ USE = "-debug -doc -examples -static-libs -test -udev -verify-sig"
             │                    │ SLOT = "1"

 └─step  4─┤ run       portage://acct-group/plugdev-0-r3
             │ run       portage://dev-lang/jimtcl-0.82
             │ run       portage://dev-libs/libusb-1.0.30

 └─step  5─┤ install   portage://virtual/libusb-1-r2
             │           └─ conf ─┤ USE = "-udev"
             │                    │ SLOT = "1"

 └─step  6─┤ run       portage://virtual/libusb-1-r2

 └─step  7─┤ install   portage://dev-embedded/libftdi-1.5-r8
             │           └─ conf ─┤ USE = "python* -cxx -doc -examples -test -tools"
             │                    │ PYTHON_SINGLE_TARGET = "python3_14 -python3_12 -python3_13"
             │                    │ SLOT = "1"
             │ install   portage://dev-embedded/libjaylink-0.3.1
             │ install   portage://dev-libs/hidapi-0.15.0
             │           └─ conf ─┤ USE = "-doc"

 └─step  8─┤ run       portage://dev-embedded/libftdi-1.5-r8
             │ run       portage://dev-embedded/libjaylink-0.3.1
             │ run       portage://dev-libs/hidapi-0.15.0

 └─step  9─┤ install   portage://dev-embedded/openocd-0.12.0-r2 (unmasked)
             │           └─ conf ─┤ USE = "cmsis-dap ftdi jlink usb -capstone -dummy -gpiod -parport -verbose-io"

 └─step 10─┤ run     portage://dev-embedded/openocd-0.12.0-r2

Total: 23 actions (1 unmask, 6 downloads, 8 installs, 8 runs), grouped into 10 steps.
       13.43 Mb to be downloaded.


>>> Assumptions taken during proving & planning:

  Package unmask (1 package):
  Add to /etc/portage/package.unmask:
    =dev-embedded/openocd-0.12.0-r2